Duo series Datasheet
DUO350/500/650 installation
DUO300/500/700/1000 installation
.net4.0 plug-in for XP

Duo series (New)

Power Factor Correction is one of the main improvements made in the new Duo series. It allows a more efficient current draw from the main circuit, translating to higher out put power with lower power consumption.
Featuring a high-end, on-board DSP. The new Duo series offers an advanced, onboard DSP to fully tune system response. A feature rarely found in affordable power amplifiers in this range.

Features

  • Class D power modules.
  • Built-in DSP with front panel control and Windows remote user interface software.
  • SAE Audio next generation Aluminum Body design.
  • SMPS power supply.
  • LCD amplifier status display.
  • XLR input and signal link connectors.
  • SpeakON NL4 and binding post output connectors.
  • Channel independent protection and clip warning indicators on the front panel.
  • Channel independent power and -3dB / -6dB / -10dB / -20dB / signal presence indicators on the front panel.
  • Ultra-lightweight weight design.
  • Fantastic sounding amplifiers with great specs.

Applications

  • Mobile / portable public address or monitoring amplification.
  • DJ sound system.
  • Small sized bar / café / lounge installation.
  • Applications with signal processing requirements.

Specifications

Model Duo300 Duo500 Duo700 Duo1000
Output power (AC 220v/50Hz. +/-10%. All channels driven output power, THD=1%)
8Ω Stereo 300W x2* 500W x2* 700W x2* 1000W x2*
4Ω Stereo 500W x2** 850W x2** 1250W x2** 1750W x2**
8Ω Bridge 1000W** 1700W** 2500W** 3500W**
Other specifications
Frequency Response (@8Ω) 20Hz – 20kHz, +0/-1dB
THD+N < 0.15% < 0.15% < 0.15% < 0.15%
S/N Rate ≥95dB ≥96dB ≥96dB ≥95dB
Input sensitivity 32dB 32dB 32dB 32dB
Input Impedance (bal/unbal) 20kΩ / 10kΩ 20kΩ / 10kΩ 20kΩ / 10kΩ 20kΩ / 10kΩ
Voltage Gain 32dB 32dB 32dB 32dB
Cooling Air flow from front to rear
DSP specifications
Crossover filtering PEQ/LSLV/HSLV
Center frequency 20Hz~22kHz, Stepping 1Hz
Filter Q 0.27-15 Stepping 0.01
Filter gain 6/12/18/24dB
High pass / Low pass Adjustable +15dB to -15dB, stepping 0.1dB , each channel output 9 segments EQ.
Maximum delay 8.3(ms)/282.2(cm)/9.26(ft)
Limiter Threshold +6dBu to -90dBu, stepping 1
Limiter release time 2895ms
Dimension / Weight(The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products.)
Product Dimensions (mm) 483 x 382 x 89 483 x 382 x 89 483 x 382 x 89 483 x 382 x 89
Packing Dimensions (mm) 560 x 420 x 170 560 x 420 x 170 560 x 420 x 170 560 x 420 x 170
Weight 5.45kg 5.6kg 5.7kg 6.8kg

Remark：
1、*Power tested under EIA standard.
2、**Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
3、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.