AX12
Active Single 12″ Vertical Line Array Loudspeaker_SPL max＞137dB
_H=110°/70° symmetric or 90° asymmetric
_Class D amplifier module with 96~265V universal voltage
_Built-in processor to deliver impressive sound
_Minimum 2,maximum 16 units line array
Features
- AX12 is a full range vertical linear array loudspeaker which is composed of single 12″ mid-lowwoofer and dual 3″ compression driver.
- It has “easy-to-use” professional installation design, with excellent phase and frequency response which make you have impressive experience even in far field. Module designed with HF horn of H 110° x V 10° frequency coverage angle, independent external active amplifier module with maximum output up to 137dB with single module. Each independent channel of power amplifier drives it’s own speaker, because of use independent power module it can achieve consistent group delay. Built-in DSP processor for easy use.
- Birch plywood cabinet with CNC manufacturing process. Patented auto-locking mechanism allows wide selection of angles while components are on the ground. Almost four times the installation efficiency of the similar products. One person installation.
- AX12 will have good performance with extended low range reinforced with BX28.
Specifications
| Acoustics | AX12 |
| Frequency response | 50~20kHz(-6dB) |
| Sensitivity | 32dB |
| SPL max | ＞137dB |
| Short term max SPL | ＞140dB* |
| Horizontal | 110°/70° symmetric or 90° asymmetric |
| LF driver | 1×12″ Neodymium driver (V.C:3″ 8Ω ) |
| HF driver | 1x Neodymium compression driver (V.C:3″; Throat:1.4″; 16Ω) |
| Power module | |
| Electric Power | 96~265V AC 50~60 Hz |
| Amplifier | 2x600W(RMS)@8Ω CLASS D |
| Processor | |
| Processor | 24Bit /96k DSP |
| DSP control | TCP/IP(Windows)(Select the preset touch surface on the touch panel) |
| Connect/Cabinet | |
| Connectors | 2x PowerCon TRUE1(Power); 2x XLR parallel(Audio) |
| Cabinet | 15-18mm birch plywood made by CNC ; Front : steel grill with coating acoustically neutral 3D fabric; Finish : black polyurea spot spray |
| Rigging | 3-point rigging system: Ground preset curvature; Inter-enclosure angles: 0.25°, 1°, 2°, 3°, 4°, 5°, 7.5° or 10° |
| Size/Weight(The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products.) | |
| Product dimension(mm) | W650xH342xD480 |
| Net weight | 32kg |
Remark：
1、* Peak level at 1 m under half space.
2、The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products.
3、All specifications are subject to change without notice.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.